A digital bathroom scale is frequently preferred to an analogue or needle-based one. For starters, digital scales provide readings that are more accurate. They typically offer better reading precision as well. The accuracy and performance of your scale might be impacted by user actions and external factors. Fortunately, many of the most frequent issues can be troubleshooted and even fixed with a little time and effort.
Reset and Test
Resetting your scale should be your initial action. Look for a slide, knob, or other adjustment method for the weight display. Turn it till the scale reads zero if there is one.
If not, your scale might include a unique code to return it to its original settings. For instance, some models call for two or three steps on a particular corner to erase all digital codes and reset the scale to zero. This information is available in the user handbook for your scale.
Test the scale’s accuracy using a known-weight object once it has been successfully reset to zero. The optimal weight to use to determine whether the scale is accurately measuring and showing weight is a 10-pound free weight. If so, the scale need to appropriately show greater weights as well.
Check to Make Sure Your Scale Is on a Level Surface
In the event that still doesn’t work, make sure your scale is positioned on a level surface.
To easily verify this, use a tiny round object, such a ball or marble. Simply take the scale off, set the marble or little ball on the ground, and then take your hand away. If the ball starts to roll, your floor most likely has a slope. Alternately, if a building level is available to you, place it there.
In either case, if your floor doesn’t seem to be level, consider moving the scale to a different part of your house where the surface is more level.
If it doesn’t work, take a look at the scale’s “feet” at the bottom. On the underside of the scale, these are typically four rubber pads positioned at each corner. Remove anything stuck on one that could cause it to become unstable.
Calibrate the Scale
Depending on how it is used, you might need to calibrate your digital scale every few months or so. If you haven’t calibrated your scale in a while, that could be the problem.
Set the scale’s calibration mode first. To set the scale in this mode, you might need to hit a particular combination of buttons. If this is not immediately evident, consult the manufacturer’s handbook. Search the web for the manufacturer name, model number, and the words “user manual” if you no longer have the user manual (or “user guide”).
Place a known-weight object on the scale once it is in calibration mode. Dumbbells with free weights are a fantastic option for this. Within a few seconds, the scale ought to display the known weight. To finish the process, push the calibration button. The scale may indicate the conclusion of the test by displaying a code, such as “End,” “Cal,” or “0,” depending on the maker and model.
Check the Batteries
Issues with the display and functionality of digital scales are frequently caused by batteries.
Remove the batteries by carefully opening the battery compartment. Clear the compartment of any dust or other objects that could obstruct the battery connection using a small, clean paintbrush or cotton swab. Try replacing the batteries with new ones if it doesn’t fix the issue.
Check the LCD Panel
A loose connection could be the cause of your scale’s LCD view panel showing only part of the data. First, try lightly pressing on the display area from the outside.
If it doesn’t solve the issue, try taking off the scale’s bottom plate and the batteries from the battery compartment. If there is a connection to that display region that is visibly loose and you can easily access it, try tightening it.
If not, you might have to return it to the maker so they can fix it under your warranty.